If you’re looking to Sell Fujikura FSM-50S SM MM Fusion Splicer With Cleaver

This is a new standard of core to core aligning arc fusion splicer.
A number of improvements have been added to the performance-proven Profile Alignment System (PAS) platform, resulting in the smallest and lightest package of its kind. With improved splice & tube-heat time, the splicing operation is the world’s fastest truly optimized for field use. Other valuable features include an ergonomic design, reduced numbers of operating steps and a powerful battery extend the boundaries of traditional field fusion splicing performance. The movable monitor and dual-direction operating system essentially gives the operator a choice of two splicers. With these features, the FSM-50S is now more than a tool, it is a work of art.
Features

• Fully automatic core alignment with 9 second splice time for SM fiber
• Reduced splice protector shrink time – now only 35 seconds
• Extremely compact and lightweight – just 2.8kg
• Automatic fibre type identification
• Multi-position monitor for front or top mounting
• High capacity battery option for 120 splice/shrink cycles
• Real time arc calibration
• Fibre clamps integrated into wind protector to reduce operation time

Dual-directional operating system
The reversible monitor accommodates the user’s ergonomic preference. With a control panel on each side, the ease of use is phenomenal.
Splice time of 9 sec.
Improved computer processing and newly introduced stepping motor help achieve 9 sec. splice time with SM fiber.
Tube-heat time of 35 sec.
Advanced heater design shortens tube-heat time to 35 sec. with FP-03 protection sleeve.
Large capacity battery option
Two types of slot-in batteries BTR-06S and BTR-06L are available.
Arc calibration-free system
Time-consuming arc calibration is no longer requried with real- time arc calibration.

Buying, Selling, Trading Fujikura FSM-50S

If you’re selling your Fujikura FSM-50S please fill out form on the right hand side of page.

If you’re looking to Sell Fujikura FSM-40F SM MM High Strength Fiber Splicer

Fujikura FSM-40F Fusion Splicer
Fujikura FSM-40F splicers provide DWDM industries with further solutions to dissimilar fiber splicing. The FSM-40F model is capable of high tensile strength splicing of typical 2.5Gpa (30N) with short cleaved length by clamping the fiber coating. The FSM-40F makes fiber handling easy to make splicing performance stable. To keep up with the development of DWDM optical communication devices, Fujikura developed the FSM-40F for high-strength splicing. The FSM-40F splices dissimilar fiber combinations, especially Erbium-doped fiber to single-mode fiber using patented sweep arc functions. The FSM-40F was specially designed to meet the more specialized needs of the factory user. The splicer requires the minimum of skill dependency and still provides a stable splice loss at a speed demanded by production applications.

Buying, Selling, Trading Fujikura FSM-40F

Features:

• Full automatic operation once fibers are set with core-to-core alignment.
• Simultaneous observation and alignment of both X view and Y view.
• Short cleaved length and high tensile strength splicing capability.
• Arc calibration function for stable arc discharge.
• Fiber sweep motion for various kind of dissimilar fiber splicing.
• Fiber holder system for minimal skill dependency and stable splice loss.
• New arc parameters to generate various kinds of adequate arc discharges for all types of fibers.
• Optical power monitoring splice with power meter feedback.
• Intentional core offset function for an in-line fixed attenuator.
• Mechanical in-line proof tester.
• Accurate splice loss estimate by observing core distortion and MFD mismatch.
• User programmable 40 splicing modes and pre-programmed splicing modes (up to 120) for various fiber combination.
• User programmable 10 tube heating modes and pre-programmed modes (up to 20) for various type of protection sleeves.
• User definable cleave angle and estimated splice loss threshold.
• Diagnostic self-test function for easy maintenance.
• The last 1200 splicing results are automatically stored in the internal memory.
• RS232C interface port for PC communication function, such as data transfer between PC and the splicer, or remote control by PC.

If you’re selling your Fujikura FSM-40F please fill out form on the right hand side of page
.

If you’re looking to Sell Fujikura FSM-40SB SM MM Fusion Splicer w/ Cleaver

FSM-40S delivers the benefi ts of PAS core alignment splicing in a field-friendly, highly portable, mini-splicer package. Ergonomic features allow the FSM-40S to be used in diffi cult aerial taut-sheath splicing conditions, which require proper workfl ow and minimal fi ber slack. This splicer has been designed for use in harsh, outdoor conditions and features an innovative wind protector, which allows splicing in 30 mph cross winds. The FSM-40SB offers identical functionality with a front-mounted tube heater and rearmounted monitor.

Features:

• Wind protector design withstands 30 mph cross wind
• Automatic core to core, low loss splicing regardless of fi ber quality or age
• Choice of monitor and tube heater position
• 15 second splicing time Excellent visibility in bright sunlight with 5” LCD monitor
• Multiple pre-programmed modes for specialized splicing
• Multiple tube heater and attenuation modes
• Selectable image display with single and dual axis fiber viewing

Buying, Selling, Trading Fujikura FSM-40SB

If you’re selling your Fujikura FSM-40SB please fill out form on the right hand side of page.

If you’re looking to Sell Fujikura FSM-40S SM MM Fusion Splicers w Cleaver

FSM-40S delivers the benefi ts of PAS core alignment splicing in a field-friendly, highly portable, mini-splicer package. Ergonomic features allow the FSM-40S to be used in diffi cult aerial taut-sheath splicing conditions, which require proper workfl ow and minimal fi ber slack. This splicer has been designed for use in harsh, outdoor conditions and features an innovative wind protector, which allows splicing in 30 mph cross winds. The FSM-40SB offers identical functionality with a front-mounted tube heater and rearmounted monitor.

Features:

• Wind protector design withstands 30 mph cross wind
• Automatic core to core, low loss splicing regardless of fi ber quality or age
• Choice of monitor and tube heater position
• 15 second splicing time Excellent visibility in bright sunlight with 5” LCD monitor
• Multiple pre-programmed modes for specialized splicing
• Multiple tube heater and attenuation modes
• Selectable image display with single and dual axis fiber viewing

Buying, Selling, Trading Fujikura FSM-40S

If you’re selling your Fujikura FSM-40S please fill out form on the right hand side of page
.

If you’re looking to Sell Fujikura FSM-40S SM MM Fusion Splicer w/ Cleaver

FSM-40S delivers the benefi ts of PAS core alignment splicing in a field-friendly, highly portable, mini-splicer package. Ergonomic features allow the FSM-40S to be used in diffi cult aerial taut-sheath splicing conditions, which require proper workfl ow and minimal fi ber slack. This splicer has been designed for use in harsh, outdoor conditions and features an innovative wind protector, which allows splicing in 30 mph cross winds. The FSM-40SB offers identical functionality with a front-mounted tube heater and rearmounted monitor.

Features:

• Wind protector design withstands 30 mph cross wind
• Automatic core to core, low loss splicing regardless of fi ber quality or age
• Choice of monitor and tube heater position
• 15 second splicing time Excellent visibility in bright sunlight with 5” LCD monitor
• Multiple pre-programmed modes for specialized splicing
• Multiple tube heater and attenuation modes
• Selectable image display with single and dual axis fiber viewing

Buying, Selling, Trading Fujikura FSM-40S

If you’re selling your Fujikura FSM-40S please fill out form on the right hand side of page.

If you’re looking to Sell Fujikura FSM-40R24 SM MM 24 Ribbon Fusion Splicer

FSM-40R24 Fusion Splicer

Features

• Compact and light with built-in AC adapter
• Color LCD screen displays all 24 fibers simultaneously
• Uses standard Fujikura fiber holders
• Self diagnostic mode
• Stores splice data for 80 24 fiber splices
• Electrode and fiber guide positions automatically adjust for different fiber counts

Designed to meet the needs of today’s high fiber density networks, the FSM-40R24 has the capability to splice ribbons as large as 24 fibers as well as single fibers. Ultra compact and lightweight, this unit features a built-in AC adapter and a dual axes optical path system to provide fully automatic, low splice loss performance in less than 50 seconds for SM, MM, DS, and NZ-DS fiber types. Individual splice loss is estimated for each splice, and 36 pre-programmed splicing modes and five pre-programmed heater modes allow for specialized splicing and various splice protector sleeve types. Memory also permits 30 user defined splice mode settings and 10 splice protection sleeve heater settings, as well as storage of downloadable splice data for 80 24-fiber splices or 320 single fiber splices. The large, color LCD screen displays all 24 fibers simultaneously in alternate axes.

Buying, Selling, Trading Fujikura FSM-40R24

If you’re selling your Fujikura FSM-40R24 please fill out form on the right hand side of page.

If you’re looking to Sell Fujikura FSM-30SF SM MM ARC Fusion Splicer Cleaver

Fujikura FSM-30SF Fusion Splicer
The FSM-30SF is designed to splice optical glass fiber for telecommunications, and can be used for high tensile splicing by a non-touch method. When using a non-touch method, the coated part of the fiber is set on the V-groove rather than the un-coated part. In conventional splicing, the un-coated part of the fiber is set on the V-groove, which may cause micro scratches on the fibers surface, reducing the tensile strength of the splice. The non-touch method eliminates micro scratches and results in a high strength splice. When using the non-touch method, V-groove and fiber clamp sizes are selected according to the fiber coat diameter.

Features:

• Normal single-mode fiber (SM)
• Multi-mode fiber (MM)
• Dispersion shifed fiber (DS)
• Cutoff shifted fiber (CS)
• Erbium doped fiber (ED) are applicable for splicing.
• Carbon coated fiber and Titan fiber are also applicable.

Buying, Selling, Trading Fujikura FSM-30SF

The splicer performs the fiber gap set, core/cladding alignment, splicing and loss estimation automatically by image processing by an internal microprocessor. A core alignment method is used for the SM mode, DS mode, and CS mode. A cladding alignment method is used for the MM mode. On the ED mode, it is possible to select the core alignment method or the cladding alignment method on the arc condition menu.

There are three kinds of ambient environmental sensors that are built into the splicer: a pressure sensor, a thermometer, and a hygrometer. Those sensors adjust the arc power in order to compensate for various of altitude/atmospheric pressure, temperature, and humidity.

If you’re selling your Fujikura FSM-30SF please fill out form on the right hand side of page.

If you’re looking to Sell Fujikura FSM-30R12 Fiber Fusion Splicers

The FSM-30R12 offers Fujikura mass fusion technology in an extremely small and lightweight mini-splicer. This splicer has the capability to splice single fibers as well as ribbons up to 12 fibers. A wind protection hood, ambient condition sensors, and slide-in modular powering units provide unprecedented mass fusion splicing in remote and outdoor splicing locations. The FSM-30R12 offers a quick 30-second splicing time.

Features:

• Wind protector design withstands 30 mph cross wind
• Built-in programmable tube heater
• Slide-in power modules include AC adapter, battery or camcorder battery adapter
• Automatically adjusts fusion arc to compensate for differences in atmospheric pressure or altitude
• Large image magnifi cation on low-glare 5” color LCD monitor provides great fiber visibility

Buying, Selling, Trading Fujikura FSM-30R12

If you’re selling your Fujikura FSM-30R12 please fill out form on the right hand side of page.

If you’re looking to Sell FSM-30R12 Fiber Fusion Splicer w/ Cleaver

The FSM-30R12 offers Fujikura mass fusion technology in an extremely small and lightweight mini-splicer. This splicer has the capability to splice single fibers as well as ribbons up to 12 fibers. A wind protection hood, ambient condition sensors, and slide-in modular powering units provide unprecedented mass fusion splicing in remote and outdoor splicing locations. The FSM-30R12 offers a quick 30-second splicing time.

Features:

• Wind protector design withstands 30 mph cross wind
• Built-in programmable tube heater
• Slide-in power modules include AC adapter, battery or camcorder battery adapter
• Automatically adjusts fusion arc to compensate for differences in atmospheric pressure or altitude
• Large image magnifi cation on low-glare 5” color LCD monitor provides great fiber visibility

Buying, Selling, Trading FSM-30R12

If you’re selling your FSM-30R12 please fill out form on the right hand side of page.

If you’re looking to Sell Fujikura FSM-30S SM MM ARC Fusion Splicer Cleaver

The Fujikura FSM-30S fusion splicer is the new generation automatic core alignment splicer.

The FSM-30S utilizes the direct core monitoring Profile Alignment System (PAS) to achieve ultra low loss and very accurate splice loss estimation regardless of fiber quality or age. While smaller and lighter than previous models, the FSM-30S has increased capabilities and more operating modes.

The FSM-30S optical system and microprocessor automatically align the fibers and inspect cleave quality. By using the Eccentricity Correction Function (ECF), the splicer determines the fiber core/cladding eccentricity and automatically compensates for in order to assure precise core alignment of the completed splice. The field-proven performance and reliability of Fujikura core alignment PAS splicers are improved with the new FSM-30S.

Features

• Fully automatic operation once fibers are set in the fixture
• Observation of both X and Y axis simultaneously
• Atmosphere, humidity and temperature compensation functions provided
• Mechanical proof test provided
• Automatically stores the last 100 splice losses together with dates.  Optional built-in memory card slot for storing additional splices.
• Mode field diameter mismatch compensation splicing programs.  Suitable for splicing two different fibers (such as DS fiber to Er-doped fiber).
• Splice loss control function for creating an in-line fixed attenuator
• Arc power is optimized automatically by an integrated arc power test
• Programmable tube heating cycle
  • Dust detection function

Buying, Selling, Trading Fujikura FSM-30S

If you’re selling your Fujikura FSM-30S please fill out form on the right hand side of page.