Selling FiTel S148S – We Buy New Used S148S (‘s) Top Dollar Paid!

If you’re looking to Sell FiTel S148S SM MM Fiber Fusion Splicer

FiTeL S148S Fiber Fusion Splicer
Fusion splicing is used to physically join together two optical fiber ends; the process may vary, depending on the type of fusion splicer used. The S148S Single-fiber Fusion Splicer uses precision, fixed V-grooves to align the fiber ends and heat from a controllable electric arc to melt the glass and butt the ends together. This results in a strong joint, with very low loss and very low backreflection.

To achieve good splicing results, it is essential to know both the proper use of a fusion splicer and the characteristics of optical fiber. Because not all fibers are identical, they can melt or fuse at different temperatures. Therefore, to minimize splice loss, it is important that the arc power and the duration of the fusion arc be properly adjusted. The S148S fusion splicer features an arc check function to help the user adjust these parameters. Other intrinsic factors that contribute to the increase in splice loss are core diameter mismatch, cladding diameter mismatch, numerical aperture mismatch, core concentricity and noncircularity.

Optical fiber is basically classified as either single-mode or multimode. Single-mode fiber, which includes dispersion-shifted fiber types, will transmit a single-mode of data at wavelengths greater than the cut-off wavelength (1170 nm). Approximately 80% of the light is transmitted within the core, and 20% is transmitted in the surrounding cladding. Therefore, the transmission path is more accurately referred to as the mode field and not as the core. With a core diameter of typically 8 µm and a mode field diameter of approximately 10 µm, single-mode fiber can transmit more data than multimode fiber and with less attenuation.

In multimode fiber, the optical signal is transmitted entirely within the core. These fibers have a core size of 50 µm to 100 µm (50 µm or 62.5 µm, typically) and are commonly used in local area networks (LANs), short distance links are closed circuit television (CCTV).

Buying, Selling, Trading FiTel S148S


If you’re selling your FiTel S148S please fill out form on the right hand side of page.

Selling FiTel S123C – We Buy New Used S123C (‘s) Top Dollar Paid!

If you’re looking to Sell FiTel S123C Clad Alignment Fiber Fusion Splicer

FiTeL S123C Fiber Fusion Splicer
With its low pro?le and new super rugged body, the FITEL S123 Series Fusion Splicer offers speedy operation for FTTX, LAN, backbone or long-haul installations. The lightweight, durable metal body frame and rubber protection corners provide robust protection, enabling use in challenging locations without compromising splicer performance. The S123 is water resistant to IPX2 and dust resistant to IP5X.

Large battery capacity makes it possible to perform up to 70 cycles of splicing and heating.

Combining portability, power ?exibility and ?eld ruggedness, the S123 Splicer delivers fast and consistent splicing with outstanding mobility and extreme ease-of-use. It also offers a splice-on-connector (SOC) solution.

Features:

  • Rugged and compact hand held design for demanding environmental conditions
  • Fast splice (13 sec) at low loss and fast heating (25 sec) for single ?ber
  • Simple operation with ?xed V-groove
  • Splicer is compatible with Seikoh Giken and Diamond SOCs
  • 70 cycles (splicing & heating) with a single battery
  • Available for all METRO/LAN/FTTX ?bers including ultra bend insensitive ?bers (e.g. EZ-Bend® Fiber)
  • Easy maintenance – Toolless electrode replacement/mirror free alignment system
  • Easy software upgrade via the Internet
  • Easily exchanged ?ber holder systems (tight holder/?ber holder/SOC holder)
  • PC interface software to allow user management of splicing programs and results
  • Auto-start shrink sleeve oven feature
  • Improved GUI to further enhance ease-of-use
  • Large memory for storing data (2,000 splice data) and image (100 images)
  • RoHS compliant

Buying, Selling, Trading FiTel S123C


If you’re selling your FiTel S123C please fill out form on the right hand side of page.

Selling FiTel S122 M12 – We Buy New Used S122 M12 (‘s) Top Dollar Paid!

If you’re looking to Sell FiTel S122 M12 SM MM Ribbon Fiber Fusion Splicer

FiTeL S122M12 Handheld Fusion Splicer
Splicing for single fiber to 12-fiber ribbon using Fiber Holder System

With its super low profile and new user interface, the FITEL S122 series fusion splicer offers next generation workability for every splicing field, FTTX, LAN, backbone, or long-haul installations. Combining the portability, power flexibility and field ruggedness of FITEL’s previous generation of hand-held splicers with the proven quality and performance of our ribbon splicers, the S122 delivers fast and consistent splicing with outstanding mobility and extreme ease-of-use.

Features:

  • Superb Mobility and Workability
    • Super low profile design, with only 4.7 cm height at the keypad, the S122 provides a stable working environment both on the work bench and palmtop. Attaching the S122 to the Work Table (optional) enables hands-free operation, as well as easy access to various work fields by folding the splicer upward.
  • Rugged Body
    • The top body and windshield are made of magnesium die-cast. The bottom body is protected with rubber corner pads. With its simple and flat shape, the S122 can survive during harsh conditions.
  • New GUI & LCD Screen
    • Featuring a new GUI (graphical user interface) and transreflective LCD screen technology, the S122 operation is a snap! Function keys are simple and information displays are crisp and clear even in direct sunlight.
  • Multi-Window Fiber Display
    • The LCD display shows the splicing process with simultaneous X and Y camera views, as well as status icons monitoring the machine conditions.
  • Fast and Accurate
    • The fast 15-second splice time and 37-second heat time creates a highly ef? cient work environment. The S122 observes the fiber from 2 directions just as all high-end splicers, promising high quality splice from trunk to FTTX.
  • Enhanced Ease of Use
    • Memory for fiber image, counters for cleaver and stripper blade replacement and visual maintenance instructions are provided for your ease of use.
  • Real Time Arc Control
    • Patented process which increases consistency and reduces splice loss. Also, virtually eliminates the need for traditional arc checks by actively calibrating the arc during each splicing cycle.
  • Fiber Clamp Vibration System
    • New fiber clamp vibration system allows for easy ? ver placement. System inspects axis offset before each splice and makes necessary adjustment for ideal splicing
  • Automatic Fiber Count Identification
    • Unit automatically identifies fiber ribbon count and selects the proper program for splicing. There is no need to manually change the program when operators want to splice different fiber counts.

Buying, Selling, Trading FiTel S122 M12


If you’re selling your FiTel S122 M12 please fill out form on the right hand side of page.

Selling FiTel S121S – We Buy New Used S121S (‘s) Top Dollar Paid!

If you’re looking to Sell FiTel S121S SM MM HandHeld Fusion Splicer

FiTeL S121S Handheld Fusion Splicer
Splicing for Single Fiber; Built-in Tight Holder for Splicing with super-short fiber lengths

A T-shape splicer, especially designed for FTTx, LAN, and other construction work. The splicer can also be used for maintenance repair and educational purposes. It is a highly cost effective unit with a color LCD screen.

The S121S machine uses the traditional fiber clamp method and features a smaller lid, which allows splicing with a shorter fiber length and makes it ideally suited for applications where the need for a fast repair splice outweighs the need for an extremely low-loss splice.

Like the S121A, the unit comes equipped with a heat-shrink oven, lithium ion batteries, and a battery charger. An AC/DC adapter is available and battery capacity is 50 splices without using the heat-shrink oven.

The unit features fully automatic fiber feed, alignment, splicing arc, and tension test. You can monitor all splicing operations for accuracy using the unit’s integrated CCD camera and 2.5-inch LCD display.

Features:

  • Compact, lightweight body
  • Superb portability
  • High-end performance with super low cost
  • Fiber holder design for greater ease and consistency
  • Clear view of the splice
  • Splices single and multimode fiber

Buying, Selling, Trading FiTel S121S


If you’re selling your FiTel S121S please fill out form on the right hand side of page.