If you’re looking to Sell FiTel S123 M12 Ribbon Fiber Fusion Splicer

Fitel S123 M12 Ribbon Fusion Splicer
With its low profifi le and new super rugged body, the FITEL® S123 Series Fusion Splicer offers speedy operation for FTTX, LAN, backbone or long-haul installations. The lightweight, durable metal body frame and rubber protection corners provide robust protection, enabling use in challenging locations without compromising splicer performance. The S123 Splicer is water resistant to IPX2 and dust resistant to IP5X.

A large battery capacity makes it possible to perform up to 160 cycles for the S123M8/M12 models with a dual battery configuration.

Combining portability, power flexibility and fi eld ruggedness, the S123 Splicer delivers fast and consistent splicing with outstanding mobility and extreme ease-of-use. It also offers a splice-onconnector (SOC) solution.

Features:

• Rugged and compact hand held design for demanding environmental conditions
• Fast splice (13 sec) at low loss and fast heating (25 sec) for single fiber
• Simple operation with fixed V-groove
• Splicer is compatible with Seikoh Giken 2 and Diamond 3 SOCs
• 160 cycles for S123M8/M12 models with two batteries 4
• Available for all METRO/LAN/FTTX fibers including ultra bend-insensitive fibers (e.g. EZ-Bend® Fiber)
• Easy maintenance – Toolless electrode replacement/mirror free alignment system
• Easy software upgrade via the Internet
• Easily exchanged fiber holder systems (tight holder/fiber holder/SOC holder)
• PC interface software to allow user management of splicing programs and results
• Auto-start shrink sleeve oven feature
• Improved GUI to further enhance ease-of-use
• Large memory for storing data (2,000 splice data) and image (100 images)
• RoHS compliant

Buying, Selling, Trading FiTel S123 M12

If you’re selling your FiTel S123 M12 please fill out form on the right hand side of page.

If you’re looking to Sell FiTel S-153 Fusion Splicer

Fitel S153 Fusion Splicer
The FITEL® S153 Fusion Splicer is an obvious choice for low cost field splicing equipment. The Active V-Groove Technology used on the S153 Fusion Splicer delivers low loss splices while helping to eliminate common Fixed V-groove splicing errors. By combining speed, precision, durability and portability in one unit, the S153 Fusion Splicer ushers in an entirely new range of applications for active alignment splicing.

The S153A Fusion Splicer canopy design, durable metal body frame and rubber protection corners provide robust protection, enabling use in demanding environments without compromising splicer performance. The S153A is water resistant to IPX2 and dust resistant to IP5X.

Equipped with a new alignment system that can save up to 20% on splicing time, the S153 Splicer’s improved heating mechanism can also reduce protection sleeve shrink time by more than 30%. In addition, a newly incorporated USB 2.0 interface speeds PC communication and image/video transfer, while enhancing reliability.

While the S153 Fusion Splicer is fast and durable, it continues the FITEL tradition of quality and excellence by delivering precise, accurate splices even under rigorous conditions in the field.

The S153 Fusion Splicer is your logical choice for a wide range of uses including FTTX, LAN, backbone, enterprise, long-haul installations, data-center and/or OEM applications. It is also an excellent option for use in the conventional telecommunications industry, along with other industries (including oil and gas).

Buying, Selling, Trading FiTel S-153

Features:

• Active V-groove design helps to eleminate common fixed v-groove splicing errors
• Rugged and compact hand held design for demanding environmental conditions
• Fast splice (9 sec) with low loss and fast heating (25 sec) 1
• 200 cycles (splicing & heating) with FITEL series battery con?guration 2
• Available for All METRO/LAN/FTTX ? bers including ultra bendinsensitive ?bers (e.g. EZ-Bend® Fiber)
• Splicer is compatible with the Seikoh Giken3 and Diamond4 Splice-on-connector (SOC)
• Easy maintenance – Toolless electrode replacement and mirror free alignment system
• Easy Software upgrade via the Internet
• Easily exchanged fiber holder systems (tight holder/fiber holder/SOC holder)
• PC interface software provides for user management of splicing programs and results
• Auto-start shrink sleeve oven feature
• Auto-start splicing
• Improved GUI to further enhance ease-of-use
• Large memory for storing data (2,000 splice data) and image (100 images)
• RoHS compliant

If you’re selling your FiTel S-153 V2 please fill out form on the right hand side of page.

If you’re looking to Sell FiTel S-178A V2 Core Alignment Fiber Fusion Splicer

S178A Version 2 Hand-Held Core-Alignment Fusion Splicer

The S178A Hand-Held Core-Alignment Fusion Splicer has beenenhanced and updated to version 2. The battery is automatically charged internally when connected to AC mains power even during operation. The new illumination lamp lights up a wide area around the V-grooves and helps operation in low light environment. The redesigned and strengthened heater simplifies the protection sleeve loading process. The S178A is fast and durable, it continues the FITEL tradition of quality and excellence by delivering precise and accurate splices even under rigorous field conditions. The S178A is equipped with a core alignment system that can complete a splice in 7 seconds (semiauto mode) and an integrated heater which can shrink a protection sleeve in 25 seconds (pre-heat mode). The USB 2.0 mini interface speeds up PC communication and image / video transfer, whilst enhancing reliability.

Although the S178A is significantly smaller and lighter in weight than previous models, its canopy design, durable metal body frame and rubber protection corners provide robust protection. This enables use in demanding environments without compromising splicing performance. Along with its rugged durability, the splicer also offers convenience. An internal battery system allows up to 200 splicing cycles (splicing/heating) and an innovative, mirror-free alignment system reduces maintenance work. The S178A is a versatile choice for a wide range of applications including FTTx, LAN, backbone, enterprise, long-haul installations, data-center and OEM. It is an excellent option for use in the conventional telecommunications industry, along with other industries (including oil and gas and outside broadcast).

Features

• Internal battery charging
• Illumination lamp lights up a wide area around V-grooves
• Userfriendly LCD display offers 4 different X/Y image layouts
• Simplified splice result indicatorred / green icon
• Rugged and compact handheld design to endure harsh environmental conditions
• Fast splice (7 sec) at super low loss and Fast Heating (25 sec)*1
• 200 cycles (Splicing & Heating) with Internal batteries*2
• Splice programs available for All METRO/LAN/FTTx fibers including ultra bend-insensitive fibers (e.g. EZ-Bend™)
• Splicer is compatible with the Seikoh Giken and Diamond Spliceon-connector(SOC)
• Easymaintenance electrode replacement /mirror free alignment system
• Easy Software upgrade via the Internet
• Simplified program fusion and heater programming
• Easily exchanged fiber holder systems (Tight holder/Removable fiber holder/SOC holder)
• PC interface software to allow user manage splicing recipes and splicing results
• Auto-start heater oven option
• Improved GUI enhancing ease-of-use
• Large memory for storing 2,000 splice records and last 100 splice result images
• RoHS compliant

Buying, Selling, Trading FiTel S-178A V2

If you’re selling your FiTel S-178A V2 please fill out form on the right hand side of page.

If you’re looking to Sell FiTel S-182K SM MM Fiber Fusion Splicer

FiTel S182K High Strength Fusion Splicer

The S182K is specifically designed for splicing fiber with different mode field diameters. Much like the S182A, the function keys and LCD monitor are located behind the splicing area in order to provide you with uncluttered, efficient access to the splicing area.

The S182K is optimized to accommodate 3-to 5-mm cleave lengths and features a high precision re-arcing function that produces smaller splice points and low splice loss. The S182K does not touch the bare portion of the fiber and when used with FITEL’s High Strength Splicing Kits provides a high strength splice with an average tensile strength of 20N. The S182 can also be used for non-high strength applications.

FEATURES:

• 20-second splice and 90-second protection
• Simultaneous X and Y view with separated view window for fiber and data on 5″ color LC
• Automatic magnification control
• High precision re-arcing function minimizes splice loss during dissimilar fiber splicing

Buying, Selling, Trading FiTel S-182K

If you’re selling your FiTel S-182K please fill out form on the right hand side of page.

If you’re looking to Sell FiTel S541A Optical Fiber Recoater w/ Cleaver

Fitel S541A Fiber Recoater

Fitel Technologies introduces the S541A, the World’s Fastest All-in-One Recoater. Designed specifically for the manufacture of optical modules and devices, the S541A provides the most desirable splice protection technique for realizing efficient space and flexible fiber layout. The S541A Recoater is an All-in-One device, performing resin injection and curing in a speedy 30 second cycle time after which it performs a post application tensile test. And it is durable: the flush UV lighting system can provide 100,000 injections before needing replacement.

Key Features
• Automatic resin injection, curing and tension test
• Runs on electric power source only (No compressed air required)
• Fast cure with flush lighting
• Long-life UV lamp up to 100,000 shots
• Programmable operation with default and customizable programs
• Injection, curing and tension test data memory for latest 100 recoating
• Linear motion tension test for up  to 20N
• Automatic Dispensing and controllable volume

Buying, Selling, Trading FiTel S541A

If you’re selling your FiTel S541A please fill out form on the right hand side of page.

If you’re looking to Sell FiTel S199M12 Ribbion Fiber Fusion Splicer S199

S199M12 Ribbon Fiber Fusion Splicer

The S199M12 Ribbon Fiber Fusion Splicer is specifically designed for splicing ribbon 1 to 12 fibers with a single machine. Splices are accomplished in 30 seconds and yield a typical loss of 0.04dB for single mode ribbon. Various failsafe features give the operator control of the splicing process, preventing costly mistakes and the necessity for re-burns.

Large Monitor
5-inch low reflection LCD is used. Can be clearly seen even under strong sunlight.

Quick Splice Time
Fibers are simultaneously inspected by two CCD cameras. As a result, the entire splicing process is a very fast. Average splice time is 30 seconds.

Embedded Self Diagnosis Function
Before carrying out real splicing, the embedded diagnosis function can help the user check the status of the machine.

Fiber Position Adjustment Button
Fiber position adjustment button can help the user to fine tune the fiber position in the v-groove.

Features:

• Splice 1-12 fibers
• Red-screen alarms
• 30-second splice
• Small compact size
• Optimized splice programs for all major ribbon fibers, including TrueWave and  Leaf.
• Average splice loss of .04dB for single mode fiber.

Buying, Selling, Trading FiTel S199M12

If you’re selling your FiTel S199M12 please fill out form on the right hand side of page.

If you’re looking to Sell FiTel S122C Handheld Fusion Splicer w/ Cleaver

FiTeL S122C Splicing for single fiber using Fiber Holder System / short cleave length / SOC

FITEL’s new connector termination system allows for unsurpassed performance and flexibility in the field.

This new “splice-on” connector eliminates the need for field polishing and significantly improves the quality of the termination and installation time required.

FITEL’s factory polished ferrules with pre-cleaved fiber stubs are spliced onto the field fiber utilizing FITEL’s proprietary ferrule holder and fusion splicer. The connector is easily assembled by using a process that requires minimal skill or training.

Features and Applications

• Simple, Fast, & Consistent Field Termination – Allows for easy field repair of pre-terminated splitters, fan outs, and drop terminals
• No Polishing or Epoxy – FITEL’s connector termination process requires no polishing or epoxy increasing the quality and consistency of fi eld connector termination. Total installation time is greatly reduced compared to traditional methods
• Fiber Management – The most difficult task for splicer operators has always been managing the fi ber upon completion of splicing. The connector termination feature on the S122C Fusion Splicers eliminates the need for splice trays resulting in easier fiber management, reduced storage requirements, and faster installation times

With its super low profile and new user interface, the FITEL S122A Fusion Splicer offers next generation workability for every field fusion splicing application: FTTx, LAN, backbone or long-haul installations.
Combining the portability and ruggedness of FITEL’s previous generation handheld units with its proven high-quality single fiber splicing capabilities (call us for the ribbon fiber version), the S122A delivers fast and consistent splicing with outstanding mobility and extreme ease-of-use. The fast and accurate S122A features a rugged body as well as a new GUI & LCD Screen, multi-window fiber display and enhanced ease of use.

The fast 13-second splice time and 37-second heat time creates a highly efficient work environment. The S122A observes the fiber from two directions, promising high quality splice from trunk to FTTx. A super low profile design, with only 1.85” height at the keypad, the S122A provides a stable working environment both on the work bench and palmtop.

The top body and windshield are made of magnesium die-cast for durability. The bottom body is protected with rubber corner pads. With its simple and flat shape, the S122A can survive during harsh conditions. Featuring a new GUI (graphical user interface) and transreflective LCD screen technology, the S122A operation is a snap! Function keys are simple and information displays are crisp and clear even in direct sunlight. The LCD display shows the splicing process with simultaneous X and Y camera views, allowing you to achieve perfect alignment every time, as well as status icons monitoring the machine conditions. Memory for fiber image, counters for cleaver and stripper blade replacement and visual maintenance instructions are provided for your ease of use.

Features:

• Splicing for single fiber using fiber holder system
• 40% reduction in weight, just 2.2 lbs. with battery
• 40% larger transflective LCD screen, viewable in direct sunlight
• New GUI interface with intuitive icons and function keys
• Simultaneous X and Y fiber views
• 50% reduction in heat time bringing total splice/heat time under 60 seconds

Buying, Selling, Trading FiTel S122C

If you’re selling your FiTel S122C please fill out form on the right hand side of page.

If you’re looking to Sell FiTel S-178A Core Alignment Fiber Fusion Splicer

The FITEL S178A optical fiber Hand-Held Core-Alignment Fusion Splicer is the latest, state-of-the-art addition to the S17x series of splicers. By combining speed, precision, durability and portability in one unit, the S178A Fusion Splicer ushers in an entirely new range of applications for core alignment splicing.

Equipped with a new alignment system that can save up to 20% splicing time, the S178A Splicer’s improved heating mechanism can also reduce protection sleeve shrink time by more than 30%. In addition, a newly incorporated USB 2.0 interface speeds PC communication and image/video transfer, while enhancing reliability.

FEATURES:

• Rugged and compact hand held design to endure any kind of environmental conditions
• Fast splice (7 sec) and Fast Heating
• 200 cycles (Splicing and Heating) with 2 batteries
• Available for All METRO/LAN/FTTx fibers including ultra bend-insensitive fibers (G657b)
• Applicable for Splice-On-Connector(SOC)

Buying, Selling, Trading FiTel S-178A

If you’re selling your FiTel S-178A please fill out form on the right hand side of page.

If you’re looking to Sell FiTel S-177A Core Alignment Fiber Fusion Splicer

Features:

• Most compact, lightweight core-alignment splicer in the industry
• T-shape body with foldable handle
• New graphical user interface (GUI) to enhance ease of use
• Transflective LCD allows clear view even in direct sunlight.
• Best-in-industry fiber magnification — 608X
• Built-in battery automatically recharges during operation when plugged into AC

The hand-held FITEL S177A incorporates an improved heating design that cuts splice-to-heat time by 40 percent, achieving a 9-second splice time and 37-second heat time. The unit’s T-shaped body design is also 40 percent lighter, weighing only 4.85 pounds including battery. Ideal for fast field use, the S177A reduces the fiber length required for splicing by 30 percent. In addition, fiber magnification power is 608X, marking the industry’s most powerful rating for a core alignment splicer.

Faster Splicing
The S177A has a lightening fast splice time of 9 seconds. Power up your production with the S177A!

Multiple Splicing Programs
The S177A comes with 42 pre-installed splicing programs, providing optical component manufacturers with programs for specialty and dissimilar fiber splicing combinations (CS980, EDF, NZDSF, etc.).

Built-in Battery
The S177A comes with an internal battery that automatically charges when the unit is plugged into AC Power – even while splicing!

Transreflective LCD
The S177A comes equipped with a new transreflective LCD that allows for clear viewing of the splice even in direct sunlight.

Large Data Memory Capacity
Data for up to 2,000 splices can be stored in the unit. All data can also be exported to a PC through USB connection to the splicer.

Machine Self-Check
The S177A is equipped with a self diagnostic feature that can automatically verify the function of all motors, sensors, and cameras.

Visual Guidance for Maintenance
The S177A is so advanced that it even offers visual step-by-step guidance for common maintenance procedures. Simply enter the maintenance menu and select the procedure you wish to perform and the unit will provide step-by-step instruction with images.

At half the size of a conventional unit, the FITEL S177A delivers the automated functionality and accuracy necessary for conventional backbone or long-haul installations along with the portability and speed needed for challenging field installations such as FTTh, FTTx and LAN.

The new hand-held FITEL S177A incorporates an improved heating design that cuts splice-to-heat time by 40 percent, achieving a 9-second splice time and 37-second heat time.The unit’s T-shaped body design is also 40 percent lighter, weighing only 2.2Kg (4.85 pounds) including battery. Ideal for fast field use, the S177A reduces the fiber length required for splicing by 30 percent. In addition, fiber magnification power is 608X, marking the industry’s most powerful rating for a core alignment splicer.

The FITEL S177A is easy to operate with its improved graphical user interface (GUI) and includes a transflective LCD screen for a clear view of splicing operations in all conditions, from complete darkness to bright sunlight. Along with AC and DC input power options, the splicer’s built-in lithium-ion battery automatically recharges during operation.

Buying, Selling, Trading FiTel S-177A

If you’re selling your FiTel S-177A please fill out form on the right hand side of page.

If you’re looking to Sell FiTel S122A Fusion Splicer Anritsu MT9081D OTDR

FITEL S122A
With its super low profile and new user interface, the FITEL S122A Fusion Splicer offers next generation workability for every field fusion splicing application: FTTx, LAN, backbone or long-haul installations.
Combining the portability and ruggedness of FITEL’s previous generation handheld units with its proven high-quality single fiber splicing capabilities (call us for the ribbon fiber version), the S122A delivers fast and consistent splicing with outstanding mobility and extreme ease-of-use. The fast and accurate S122A features a rugged body as well as a new GUI & LCD Screen, multi-window fiber display and enhanced ease of use.

The fast 13-second splice time and 37-second heat time creates a highly efficient work environment. The S122A observes the fiber from two directions, promising high quality splice from trunk to FTTx. A super low profile design, with only 1.85” height at the keypad, the S122A provides a stable working environment both on the work bench and palmtop.

The top body and windshield are made of magnesium die-cast for durability. The bottom body is protected with rubber corner pads. With its simple and flat shape, the S122A can survive during harsh conditions. Featuring a new GUI (graphical user interface) and transreflective LCD screen technology, the S122A operation is a snap! Function keys are simple and information displays are crisp and clear even in direct sunlight. The LCD display shows the splicing process with simultaneous X and Y camera views, allowing you to achieve perfect alignment every time, as well as status icons monitoring the machine conditions. Memory for fiber image, counters for cleaver and stripper blade replacement and visual maintenance instructions are provided for your ease of use.

Package includes Splice Body, soft carrying case, straps, 250um fiber holders (pair), Li-ion battery, AC adapter, battery recharger, electrodes (pair), electrode cleaning disk and user manual.

Features:

• Splicing for single fiber using fiber holder system
• 40% reduction in weight, just 2.2 lbs. with battery
• 40% larger transflective LCD screen, viewable in direct sunlight
• New GUI interface with intuitive icons and function keys
• Simultaneous X and Y fiber views
• 50% reduction in heat time bringing total splice/heat time under 60 seconds

Buying, Selling, Trading FiTel S122A

Anritsu MT9081D

The MT9080 Series ACCESS Master is provided with the functions that are required to perform diagnosis of optical fibers fault on optical fiber lines, specifically FTTH lines.

Table 1.1-1 MT9080 Series ACCESS Master functions

<1> Optical Pulse Testing (OTDR)

Capable of measuring the connection loss, fiber loss, and distance of an optical fiber line. You can find the fault position of a breakage. This function works in two modes: Fault Locate and Trace Analysis. In both modes, the function automatically detects event positions such as splice points with loss exceeding the preset threshold or return loss, and lists the data in an event table. In the Fault Locate mode, possible fault points of the detected events are also listed at the upper right corner of the screen

<2> Optical Power Meter (OPM)

Capable of measuring the optical power level. By measuring the communication light power level in the customer’s system, you can easily decide whether the fault point is on the optical fiber or network.

<3> Optical Light Source (OLS) for Fiber identification

Available as the light source for fiber identification equipment (ID tester). CW light or modulation light of 270 Hz/1 kHz/2 kHz is output. (CW light is available for the MT9081x only.)

<4> Visible Light Source (VLD)

Works as the visible light source by means of a red laser diode. Available for visual fiber identification by visual means, fiber identification by bending, detection of breaking points within the OTDR dead zone, and other purposes.

<5> IP Network Connectivity

Check Function PPPoE connection check, Ping test, trace route test, download throughput measurement, throughput measurement, and counter measurement are available by connecting to an Ethernet interface (10/100/1000Base-T) such as ONU. Refer to the MT9080 Series ACCESS Master IP Network Connectivity Check Function Operation Manual for details.

Visible Light Source (Option 002)

Allows you to get visual information about faults in the optical fiber.

IP Network Connectivity Check Function (Option 001)

Allows you to check connectivity with the network

Key Character Displays (Option 009 English)

These designate the language in which characters are represented on the key panel.

Protector (Option 010)

Useful for outdoor use. Provides a protective cover on the front panel and shoulder cover.

If you’re selling your FiTel S122A please fill out form on the right hand side of page.